Washing the car on its own is a good idea for anyone who wants to make sure that the vehicle will take all necessary care during the process. But it is important to know how to wash the car without damaging the paint. Leaving the car clean is one of the main ways to keep the bodywork always beautiful and well cared for. However, when washing the car the wrong way, it is possible to harm much more than to help. Many owners, without the necessary knowledge, end up scratching all the paint or even staining the vehicle. Fortunately washing the car without damaging the paint is not so complicated. One only needs to be patient and methodical with the way you will carry out the cleaning
How to wash the car without damaging the paint.
To wash the car you need to use good products and know what procedures should be done to avoid problems.
Material needed to clean a car
The first part is to separate everything you will need to wash the vehicle with a more than satisfactory result. Some main items are:
Good quality automotive shampoo
Multi purpose cleaner or wheel cleaner
High pressure washer
In the absence of the washing machine, it is possible to use a common hose. However, in addition to helping you get a lot more dirt and more protection from the paint, with the washer you will save a lot more water, which is critical.
Remembering that it is important to use good products from reputable brands. Low quality products can damage the bodywork. Another tip is to never replace the automotive shampoo with detergent. The detergent dries
plastic and rubber and will surely damage the aesthetics of your car.
Care before washing the car to avoid damaging the paint
One care that many homeowners do not take is to always wash the vehicle in the shade and with the cool bodywork. When the car is warm, the soap dries much faster and letting the soap dry on the bodywork will cause stains on the vehicle. Another concern that must be followed throughout the process is never to let the towels and microfiber gloves touch the floor. If one of the two items falls to the floor, it is possible that sand and small grains get stuck in the fabric, causing an abrasive action that can scratch all the paint. Lastly, an interesting recommendation is to protect the eyes during washing, especially when using a high-pressure washer. This will prevent splashes from damaging the vision.
Step by step to wash the car without damaging the paint.
As we have said, the first step is to make sure the vehicle is cool. To start washing the car, you need to put automotive shampoo along with water in one of three buckets. Use the solution indicated by the manufacturer. The other two buckets must contain water. One will be used to wash the wheels while the other will only be used to rinse the cleaning materials. Throw water all over the car. A good water bath will remove the soot and the thicker dirt, but throw only water, without any chemicals. The next step is to clean the wheels. First because it is much heavier cleaning, second because it avoids reworking. If you wash the body first and leave the wheels last, it is likely that while washing them the body will get dirty again.
Wheels, including tires, can be washed with water and a multipurpose or specialized cleaner, and with the use of a wheel sponge and wheel brush. Clean all wheel and tires. Finish by cleaning the mudguards and the wheelhouse. It is important to remember that the water used at the moment, as well as the bushing or brush, should not be used in the bodywork under any circumstances.
How to wash a bodywork
Now we go to the most important part and that more demands care when washing the car without damaging the paint. Start at the ceiling by dipping the microfiber glove inside the solution with shampoo. Wash one half of the ceiling at a time. Throughout the body wash process, wipe the sleeve side slightly, then turn. Put the water in the bucket of clean water to remove the dirt before returning to the bucket with shampoo The process should be done with care and patience. After washing a little, rinse with the hose to prevent the foam from drying on the body. The movements must always be done in one direction, never make circular movements. When you wash the car in round movements, it ends up with several small scratches that are quite visible.
Another important tip is to never force while rubbing. The ideal is to use only the weight of the microfiber glove, without pressure. The washing path should always be top-down, both while rubbing and when rinsing. Finally, it is necessary to dry with the microfiber towels. At that time, the more towels you have, the better. The recommended is to dry a little and already put the towel to wash.
After finishing washing the car, the best thing to do is apply some protection. A simple protection, but that works very well is the use of automotive waxes. A good quality wax applies a good layer of repellent protection that will prevent dirt from sticking to the bodywork and will greatly facilitate the next cleanings. If the wax is good, there is the possibility of doing dry washes the next two or three times. However, to wash the car without damaging the paint, we recommend that the cleaning that we indicate should be done at least once a month. This whole procedure can give a lot of work and require patience, but it is the best way to take care of the aesthetics of the vehicle.