You are experiencing a water pipe problem Don’t need to call a repairman. Because there is a simple solution to solve the problem of water pipes by how to fix the water pipe by yourself and home appliances. That are close at hand. Want to know how the water pipe works? Anyway, find the answer together from 12 ways to solve the water pipe problem.
Rubber toilet pump can help you.
How to fix clogged pipes is a good pump method. But must use the correct method. Pumping it into the pipe and then pumping up and down about 6-10 times to remove the blockage in the pipe.
Vinegar and baking soda can help you.
If there is a problem with clogged water pipes, it is recommended to pour about 8 cups (1.89 l) of baking soda into the pipe. Then pour ½ cup vinegar along and leave for a while Then pour hot water into the pipe again.
Baking soda and salt can help you.
This method is similar to Method 2 but turns from vinegar into salt, about 1 cup (0.24 l) and ½ cup salt into the tube and let it leave 1 cup (0.24 l). Then pour into another 2 cups (0.47 l).
Hangers can help you.
If we can see the debris that is clogged in the pipe Let the hangers be loosened into a long wire, bent at the ends up slightly to make a hook. Then bring the wire with the head hooked down into the pipe to bind the debris that clogged the pipe up.
Vacuums can help you.
If the house has a vacuum cleaner that can be used in both remote areas and areas that are recommended for vacuuming from the bottle, then use it with a vacuum cleaner. Suck out all the clogged pipes.
Caustic soda can help you.
Solution to be careful when preparing protective equipment by wearing a protective mask and glasses To mix together when bubbles and hot steam are poured into the toilet, leave for 20-30 minutes, then pour the boiling water.
Dishwasher liquid can help you.
By pouring a dish washing liquid into approximately 6 cups (1.42 l) of the tube. Followed by warm water into the pipe Dish washing liquid will go down to bite off the grease from pipe. But better than that it is advisable to wear rubber gloves and reach to pull out the debris that stuck. Already will help solve the problem of clogged pipes better.
Remove the water pipe to clean can help you.
First, close the water valve to stop the water flowing. Then put the tray underneath the water pipe below, then slowly remove the water pipe, the joints between the sink and the wall come out one by one Then use a toothbrush to scrub and clean the blockage Then take the water off the mouth of the water to clean out. Then handle the pipe back to the same.
Vinegar and salt can help you.
Another formula to eliminate clogged pipes that are non-toxic, destroying water pipes. By pouring salt cup salt and baking soda, 8 cups (1.89 l) of soda and 8 cups (1.89 l) of vinegar into 10 minutes. Then pour the boiling water into it to clean the grease that is stuck in the pipe and get rid of the dirt.
Enzyme products Non-destructive water pipes can help you.
Enzyme water products are sold in general stores. If used to clean the clogged pipes, it is advisable to choose an enzyme that is organic. Because it does not destroy the surface of the water pipe Read and follow the bottle label strictly. Then let the enzyme work by leaving it for 1 night and then rinse with clean water again in the morning.
Drain snake can help you.
Do not want to waste time solving problems with clogged pipes. We recommend using a pipe spring, also known as a drain snake. Inserted into the clogged pipe. Use a drain snake to penetrate and open the water or press the toilet to chase away the blockage as well.
liquid bleach for white clothes can help you.
The liquid bleach for white clothes it can help to break up a grease in the water pipe as well. First, remove the filter from the pipe. Then pour about 1 cup (0.24 l) of liquid bleach into the water and leave it for 10 minutes. Then the water in the pipe gradually decreases. The clogged pipe is already removed and clean the pipe as usual.